Table of Content
Sure, you might not have a 4K TV right now, but as the technology becomes cheaper this might change. These are another somewhat archaic cable, but if, like me, you hang on to old video devices, then you may find yourself needing them at some point. DVI cables are capable of giving out HD signals at very high resolutions and excellent frame rates. Younger readers probably won’t have any idea what these are, but they’ll be a familiar sight to everyone else. They cover the same bases as RCA cables, and usually have red, white, and yellow pins. By far the most expensive material for cables, but also the best.
If you’ve never used a soldering gun, then you might want to try a different method. It can be unsafe if you’re not familiar with the process. Sound Certified mentions that you’ll have to get the right size wire gauge. That’s the only way that you’ll be able to extend your wires, and it’s necessary for every method. You can choose various lengths, some of which come with a rubber coating and others that don’t. WikiHow mentions that turning off the power is the first step that you should follow.
HEAVY DUTY 6.2/6mm/12 FOOT HIGH QUALITY SPEAKER CABLE FOR OLDER HOME THEATERS
If you notice that they wiggle, then it’s time to redo the process from the first step. Disconnect the wires from the speaker system and bend them to face upwards. They should have about one inch of exposed metal since you’ll be melting the wires together.
When they’re pressed all the way to the top, twist the nut until you can’t anymore. The best way to know is when the wires start turning rather than the nut. Don’t over-tighten it, or you could cause the cap to loosen inside of the nut.
Make sure your devices are well ventilated
Both of them produce high amounts of heat , so you’ll also need safety gloves and long sleeves to prevent yourself from getting burnt. Luckily, the contact point is so small that they’re very easy to use. Whether you’re trying to tidy the appearance of the wires or you want a little more wiggle room, it’s not too difficult to extend the connections. All you need is the right tools, supplies, and techniques. The best thing about HMDI cables is that they do everything you need them to.
If your speakers plug into the wall, all you have to do is unplug them and set them aside. Note that some speakers are wired together, then wired into a wall outlet. In those circumstances, you could label them as you did in the previous step or keep them wired together and unplugged at the outlet.
AFTERMARKET SPEAKER CONNECTORS
Grab the new gauge wire that you purchased from the hardware store and create a small twist at the end. The only downside of using wire nuts is that improper installation tactics can lead to loose ends. If they get too loose, it could cause disconnections or electrical arcing, a symptom that causes sparks and fires. The good news is that you’re about to learn how to avoid both of those issues. If your speakers are attached to the home entertainment system, you’ll need a screwdriver. Unscrew the connections to free the wire, then place the speaker aside.
They used to be the industry standard for high quality video signals, but this is obviously now covered by HDMI cables. This is the industry standard now, but you might find some older cables that are just plug in. Coaxial cables are capable of pumping out high definition video signals all the way up to 1080p. They currently don’t cover 4K, but the technology is still very new and not available on standard TV channels anyway. A poor, budget cable will essentially void any quality you’ve intended by buying an expensive TV or speaker system. So investing in good cables is an important step in building your home theater.
Heavy Duty 12 Foot High Quality Speaker Extension Cable for Samsung Systems
Generally, you want to try and keep wires as short as possible. This will mean less resistance in your setup, and so you’ll get the most out of your speakers. After all, conductivity ensures you’re getting exactly the quality you expect from your devices. I was a little wary that this would not be what I was looking for so I started by ordering one cable.
You can use the crimping tool or the wire cutters if they have gauge slots. All you have to do is locate the number on the tool, slide the wire through, squeeze, and pull the rubber. Next, you’ll need to disconnect the speakers from the entertainment system. This might seem obvious, but you’d be surprised to know the number of people who forget it.
Crimping is a common method that allows you to connect loads of wires in a short amount of time. You won’t be using heat guns or soldering guns, nor will you have to twist wires and nuts repeatedly. If you want to give shrink tubing a try, get a heat gun and follow the steps under the next subheading. Soldering your speaker wires is a surefire way to get the best connection, but it’s the most complex method. You’ll need a soldering gun and the right tools to get the job done. There are plenty of kits that come with everything you need.
It’s a tedious process, but it’s just about as tough as it gets once you finish. You won’t need to worry about loose wires or broken connections for many years to come. Ensure that they’re squeezed and twisted tightly to prevent them from loosening.
They shouldn’t come apart when you wiggle the wires or pull on them. Once you’re sure that the twist is perfect, grab your wire nuts and head to the next step. Butt connectors, butt splices, and crimp connectors all mean the same thing. They’re designed to keep two wires together by clamping plastic onto the wires.
No comments:
Post a Comment